Product Data
  • 29
  • 30

PROTECTIVE WAX FOR RUBBER

A mixture of refined paraffin and microcrystalline wax

English Name PROTECTIVE WAX FOR RUBBER

Technical Indicators

ModelnumberKM-S643
AppearancePale yellow or white granules
Melting point(°C)61.0 ～ 67.0
Heating loss(%)0.2 max
Ash content(%)0.1 max
Range of applicationFull temperature


Carbon number distribution control index



KM-S643
The first one is C-MAXThe second C MAXISO Content(%)C25～C29C30～C34C35～C39
C25~C27C31~C3330.0±5.025.0±5.035.0±7.019.0±5.0


注：指標(biāo)僅對本產(chǎn)品適用。

Product Advantages

  • -Bimodal wax, which can precipitate wax with different peaks at low and high temperatures to form effective protection
  • -It has lower solubility than ordinary paraffin at room temperature and can form a protective layer on the rubber surface at a moderate speed and continuously.
  • - Has a wider range of temperature, environment and climate protection than ordinary paraffin for rubber
  • -Can continuously and stably form a uniform protective layer to resist the damage of rubber by heat, ozone and light
  • -Little or no effect on vulcanization, no bubbles
  • - The formed protective film is strong and ductile, and will not break or break when the rubber is stretched to a certain extent
  • - White or slightly yellow products, no coloring, will not cause pollution to the product, can be widely used in white or light-colored products.

Performance and Application

Bimodal structure protective wax, the first carbon peak is about C26, the second carbon peak is about C32. The heterogeneous hydrocarbon content is 32%, the best film forming temperature is about 40°C, and the dense wax film is formed at a moderate rate, which has good stability to dynamic stress, and is suitable for a wide temperature range, especially for long-term effective protection of tires and rubber, which is suitable for most tires.

kemai
性能及應(yīng)用

  • Packaged Form

    Woven bag or paper-plastic composite bag, net content 20kg/ bag, can also be used according to customer requirements in other packaging forms.

  • Transportation

    - lt can be transported by general means of transport, avoid sun and rain when transporting, light loading and light unload-ing when handling. -Keep in a dry room with good ventilation, avoid direct sunlight, away from fire.

  • Storage Period

    The storage period is 12 months from the date of production.